Houston Electrical Panel Upgrades 2025

An electrical panel upgrade in Houston isn’t just a technical improvement — it’s a safety essential. 

If you live in the HOU area, chances are your home’s electrical demands have changed since it was built. More appliances, smart home tech, EV chargers, and HVAC systems are now the norm. And that puts pressure on outdated electrical systems.

Houston’s aging housing stock, especially in neighborhoods like The Heights, Montrose, and Spring Branch, often still runs on 100-amp or even 60-amp panels. These aren’t designed to handle the load of modern life. That’s where a home breaker replacement/electrical panel replacement comes in.

What Is an Electrical Panel and Why Is It So Important?

Your electrical panel is the heart of your home’s power system. Also called a breaker box, it distributes electricity from the utility company to various circuits throughout your home. Modern panels use circuit breakers to protect these circuits from overloads, while older systems may use fuses.

When breaker panels malfunction or are undersized for the load they are tasked with, the risk for electrical fires and outages significantly increases. An electrical panel upgrade to a 200-amp panel or higher ensures that your home can safely power all your devices and systems. More importantly, it protects your family and property from electrical hazards.

Signs You Need an Electrical Panel Upgrade

Recognizing the signs that your electrical panel needs an upgrade can prevent potential hazards and improve your home’s functionality. Here are key indicators:

• Frequent Breaker Trips: If your breakers trip often, especially when using multiple appliances, it may indicate that your panel can’t handle your home’s electrical load.
• Flickering or Dimming Lights: Lights that flicker or dim when appliances are in use suggest that your panel is struggling to distribute power effectively.
• Use of Fuses Instead of Breakers: Homes with fuse boxes are outdated and may not meet current safety standards. An electrical panel upgrade will enhance safety and efficiency.
• Burning Smell or Discoloration: A burning odor or scorch marks around the panel indicate overheating, which is a serious fire hazard.
• Warm or Hot Panel: The panel should not be warm to the touch. Heat suggests overloading or faulty wiring.
• Rust or Corrosion: Rust signifies moisture intrusion, which can compromise the panel’s integrity and safety.
• Insufficient Amp Capacity: Modern homes typically require 200-amp service to accommodate appliances like HVAC systems, EV chargers, and high-demand electronics. Older panels with  60-100 amps are often inadequate for modern power needs.

These signs indicate your system is overwhelmed and possibly unsafe.

Houston Electrical Codes & Compliance

Houston and surrounding cities like Kingwood, The Woodlands, Dayton, and beyond. Follow the National Electrical Code (NEC), but local inspectors may have their own requirements. An electrical panel upgrade will ensure you meet current codes, which is critical when selling your home or applying for insurance.

Many Houston homeowners are unaware that a substandard or outdated electrical panel can void a homeowner’s insurance in the event of an electrical fire. Replacing it proactively is a smart move.

Cost of Electrical Panel Replacement in Houston

In Greater Houston, electrical panel replacement costs typically range from $1,700 to $1,850+, depending on several factors:

• Amperage (100A, 150A, 200A+)
• Whether you need a full service upgrade (meter and wiring)
• Accessibility of the panel
• Permit and inspection fees

Homeowners should always get a written estimate and confirm that the contractor is licensed and insured. Don’t settle for “handyman” fixes — this is a job for experienced electricians only.

What Size Electrical Panel Do I Need for My Home?

Choosing the right size electrical panel for your home is one of the most important steps in planning an electrical panel upgrade. The size of your panel determines how much electricity your home can safely handle at once, and undersizing it can lead to constant breaker trips, overheating wires, and even fire risks.

So, how do you know what size electrical panel your home actually needs?

Electrical Panel Sizing/Power Explained:

Electrical panels are rated by amperage — most commonly 100 amps, 150 amps, 200 amps, and in some larger or custom homes, 400 amps. The amperage tells you how much electricity your system can safely distribute at once.

• 100-Amp Electrical Panel: Older homes built before 1980 may have 100-amp panels. While this was standard in the past, it’s often insufficient for today’s demands.
• 150-Amp Electrical Panel: A modest electrical panel upgrade from 100 amps may be acceptable for small homes or condos without central AC or large appliances.
• 200-Amp Electrical Panel: The current standard for most single-family homes. Offers enough capacity for HVAC systems, electric water heaters, modern kitchens, and even EV chargers.
• 400-Amp Electrical Panel: Usually reserved for large custom homes with extensive square footage, multiple HVAC systems, or workshops.

How to Calculate Your Home’s Electrical Load & What Size Electrical Panel You Need:

To determine the correct size electrical panel upgrade, a licensed electrician performs a load calculation, factoring in:

• Square footage of the home
• Major appliances (e.g., ovens, dryers, electric water heaters)
• HVAC systems (AC and heating)
• Lighting and outlet circuits
• Additional needs (EV chargers, hot tubs, tankless water heaters, etc.)

As a general rule of thumb:

• Homes under 2,000 sq ft with standard appliances may only need a 150-amp panel.
• Homes between 2,000–3,000 sq ft or with high power usage should have at least 200 amps.
• Homes over 3,000 sq ft or with additional buildings (like detached garages or workshops) may benefit from 400 amps or a subpanel setup.

Why Bigger Isn’t Always Better When it Comes to an Electrical Panel Upgrade:

Some homeowners assume they should automatically install the largest panel available — but that’s not always necessary. Oversizing your panel adds to your upfront cost without giving you extra value unless you truly need it. It’s best to match your panel size to your current and future power needs.

However, if you plan to:

• Add an electric vehicle charger
• Install solar panels
• Upgrade your kitchen appliances
• Add a room or outdoor kitchen

…it’s smart to plan ahead and go for a 200-amp electrical panel upgrade, even if your current system isn’t maxed out yet.

Have Houston’s #1 Residential Electrician Size It Right

If you’re in the Greater Houston area, don’t guess. A fully-qualified and licensed residential electrician in Houston can perform a complete electrical load assessment and recommend the best panel size for your home. Whether you just need a few electrical repairs or a full electrical panel upgrade, A Phase Electric will ensure your upgrade is future-ready and up to code.

What Happens During a Panel Upgrade?

Here’s what a typical home breaker replacement or panel upgrade process looks like in Houston:

1. Initial Inspection: The electrician assesses your current setup and recommends the appropriate amperage.
2. Permits and Scheduling: Your electrician files for permits with the city or county.
3. Power Shutoff: CenterPoint Energy temporarily disconnects power.
4. Old Panel Removal: The outdated panel is safely removed.
5. New Panel Installation: The new panel is installed and wired.
6. Inspection and Approval: A city inspector signs off.
7. Power Restoration: Power is restored, and everything is tested.

Most projects take one day, though major upgrades could extend to two.

Trusted Electrical Panel Upgrade Services in Houston

When searching for reliable electricians in Houston, always look for:

• Texas state licensing (A Phase Electric’s TECL# 34091)
• Insurance coverage
• Extensive experience
• Customer Reviews

Whether you’re in Conroe, Atascocita, or Spring, choose an electrical contractor with local experience. They’ll be familiar with permit requirements and common electrical challenges in Houston homes.

Pro tip: Ask if the company offers a warranty on parts and labor. A quality installer should stand behind their work.

Future-Proofing Your Home with a Panel Upgrade

Electrical needs will only grow. Smart thermostats, security systems, EVs, and all-electric kitchens are becoming standard. A panel upgrade isn’t just a fix for today — it’s an investment in the future.

Consider adding space for future circuits or even installing a panel with surge protection built in. If solar is in your future, now’s the time to prep for that, too.

FAQs About Electrical Panel Upgrades in Houston

• How do I know what size electrical panel I need for my home? A licensed electrician will calculate your home’s load demand based on square footage, appliances, and usage.
• Is an electrical panel upgrade noisy or disruptive? Not usually. You may be without power for 4-8 hours, but the work itself isn’t loud.
• Can I upgrade the panel myself? No. This is a complex, dangerous task that requires professional licensing and inspection.
• Are permits really necessary? Yes. Permits ensure your upgrade is safe and up to code. They also protect you during home appraisals or sales.

Upgrade Your Home Electrical System with Confidence

If you live in the Greater Houston area and your home is showing signs of electrical strain, it’s time to consider an electrical panel upgrade. It’s not just about keeping the lights on — it’s about protecting your home and preparing for the future.

Whether it’s a full electrical panel replacement, a home breaker replacement, or a circuit breaker replacement, the key is acting before a problem turns into a hazard. Ready to power up safely? 

Call A Phase Electric Now at 832-990-4248 – Our licensed Houston electricians are ready to provide you with a complete electrical inspection and the peace of mind you deserve.